Feature setup
Feature setup
Program home and local
area codes
You can program this phone to recognize one home and up
to five local area codes. See Home area code and Local
area code on page 6 for definitions.
1. Press E to begin feature setup.
2. Press - until the screen display includes
SPECIAL OPTIONS.
3. Press E. The screen display includes
LINE USAGE.
4. Press - until the screen display includes
AREA CODES.
5. Press E. The screen display includes
HOME AC and a prompt to enter a home area
code (1-3 digits).
6. Use the dial pad keys to enter your home area
code, then press -. The screen display includes
LOCAL AC1 and a prompt to enter a local area
code (1-3 digits).
If you need to enter any local area codes, use the
dial pad keys and then press - to scroll to the
next screen (LOCALhAC2,hLOCALhAC3,hLOCAL
AC4,handhLOCALhAC5).
NOTE: If you must dial the area code to place
calls within your own area code, enter 000 for the
home area code and enter your area code as a
local area code.
7. When you are finished entering all of the area
codes you need to program, press - until the
screen display includes DONE.
8. Press E. The screen display includes
AREA CODES.
9. Press - until the screen display includes
LINE GROUP, then proceed to step 5 on
page 41 to assign the line group.
—OR—
Press and hold E to return to the idle
screen.
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
40
i
ii
ii
n
nn
nn
To Next Page
Loading...
Need help?
General
