Feature setup
Feature setup
Set auto-attendant day and night
times
The auto-attendant feature only works with a
multi-phone system. If you have more than one
phone in your system, you MUST program the
hours for day and night time so the answering
system plays the correct outgoing announcement.
Please see Answering system Auto-attendant
operation beginning on page 110 for a detailed
description of this feature.
1. Press E to begin feature setup.
2. Press - until the screen display includes
DTAD/AA.
3. Press E. The screen display includes
ANSWERXSTATUS.
4. Press - until the screen display includes
DAY/NIGHT TIMES.
5. Press E. The screen display includes
DAYxTIME.
6. Press E to start to change the day time
setting. The screen display includes HOUR and
the current setting.
—OR—
Press - and skip to step 11 on page 48 to
leave the day time setting as it is and begin to
change the night time setting.
7. Press < or > until the correct day time hour
is shown. Then, press - to save the day time
hour setting. The screen display includes
MINUTE and the current setting.
8. Press < or > until the correct day time
minute is shown. Then, press - to save the
day time minute setting. The screen display
includes AM/PM and the current setting.
continued on page 48
47
i
ii
ii
k
kk
kk
o
oo
oo
n
nn
nn
To Next Page
Loading...
Need help?
General
