Feature setup
Feature setup
Set auto-attendant day and night times
continued from page 47
9. Press < or > to toggle between AM and PM.
When the correct setting is shown, press -
to save the day time setting. The screen display
includes DAY TIME and DONE.
10. Press E and then press -, the screen
display includes NIGHT TIME.
11. Press E to change the night time setting.
The screen display includes HOUR and the
current setting.
12. Press < or > until the correct night time
hour is shown. Then, press - to save the
night time hour setting. The screen display
includes MINUTE and the current setting.
13. Press < or > until the correct night time
minute is shown. Then, press - to save the
night time minute setting. The screen display
includes AM/PM and the current setting.
14. Press < or > to toggle between PM and AM.
When the correct setting is shown, press -
to save the night time setting. The screen
display includes NIGHT TIME and DONE.
15. Press E and the screen display includes
NIGHT TIME. Press - and the screen displays
DONE.
16. Press E until the screen displays
DAY/NIGHT TIMES. Press - until the screen
display includes TOLL SAVER, then proceed to
step 5 on page 49 to set the toll saver.
—OR—
Press and hold E to return to the idle
screen.
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.
48
i
ii
ii
k
kk
kk
o
oo
oo
n
nn
nn
To Next Page
Loading...
Need help?
General
