AT&T CL83519 - Telephone base settings overview; Ringer volume (Base)

15
Telephone settings
Handset settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information. ²ÂÈ¶´ÁÇÈÅÁÂæ
the date and time settings of the caller ID service and set the date and time
manually.
1. When the handset is in idle mode, press MENU/
SELECT to enter the main menu.
2. Press
TCID or SDIR to scroll to Set date/time, then press MENU/SELECT.
3. Press
TCID or SDIR to select the month, then press MENU/SELECT, or enter the
number using the dialing keys.
4. Press
TCID or SDIR to select the day, then press MENU/SELECT, or enter the
number using the dialing keys.
5. Press
TCID or SDIR to select the year, or enter the number using the dialing
keys, then press
MENU/SELECT to move on to set the time.
6. Press
TCID or SDIR to select the hour, then press MENU/SELECT, or enter the
number using the dialing keys.
7. Press
TCID or SDIR to select the minute, then press MENU/SELECT, or enter the
number using the dialing keys.
8. Press
TCID or SDIR to select AM or PM, or press 2 for AM or 7 for PM.
Press
MENU/SELECTÇÂ¶ÂÁèÅÀ
Note: If the clock is not set when a message is recorded, the system announces, “Time and day not set,” before it plays
the message.