30
Telephone operation
Options while on calls
Chain dialing
Use this feature to initiate a dialing sequence from the numbers in the directory,
caller ID log or redial memory while you are on a call.
Using a cordless handset:
To access the directory or caller ID log while on a call:
1. Press MENU/
SELECT.
2. Press
TCID or SDIR to scroll to Directory or Caller ID log, then press
MENU/SELECT.
3. Press
TCID or SDIR to scroll to the desired number.
4. Press MENU/SELECT to dial the number shown.
To access the redial list while on a call:
1. Press REDIAL/
PAUSE to show the most recently dialed number.
2. Press
TCID or SDIR to scroll to the desired number, or press REDIAL/PAUSE
repeatedly to find the desired number. Press MENU/SELECT to dial the number
shown.
Using the telephone base:
To access the directory or caller ID log while on a call:
1. Press MENU/
SELECT.
2. Press
TCID or SDIR to scroll to Directory or Caller ID log, then press
MENU/SELECT.
3. Press
TCID or SDIR to scroll to the desired number.
4. Press
MENU/SELECT to dial the number shown.
To access the redial list while on a call:
1. Press REDIAL/
PAUSE to show the most recently dialed number.
2. Press
TCID or SDIR to scroll to the desired number, or press REDIAL/PAUSE
repeatedly to find the desired number. Press MENU/SELECT to dial the number
shown.
To Next Page
Loading...
Need help?
General
