38
Multiple handset use
Push-to-talk (PTT)
Answer a PTT call
You can respond to a PTT call, as described below.
1. When your device receives a PTT call, it beeps and shows Press and hold
[PTT] to talk.
2. When the other party is speaking, your speakerphone light is on, and your
device shows:
f PTT From HS X To HS XÇ»¸èÅÆÇX represents the initiating handset
number, and the second X represents your handset number; a maximum
of four handset numbers appear).
-OR-
f PTT From HS X To Base & HS XÇ»¸èÅÆÇX represents the initiating hand-
set number, and the second X represents your handset number; a maxi-
mum of four handset numbers appear).
-OR-
f PTT From Base To HS X (the X represents your handset number; a
À´Ë¼ÀÈÀ¹èɸ»´Á·Æ¸ÇÁÈÀµ¸ÅÆ´Ãø´Å
3. °»¸ÁÌÂÈÅÆÃ¸´¾¸ÅûÂÁ¸¿¼º»Ç¼ÆÂæÇ»¸Æ¶Å¸¸ÁÆ»ÂÊÆPress and hold
[PTT] to talk), press and hold PTT on your handset or PTT/
FLASH on your
telephone base. You will hear a chirp. Speak towards the device.
f While you are speaking, your device shows PTT To handset: X
(X represents the handset numbers of one or more destination handsets; a
À´Ë¼ÀÈÀ¹èɸ»´Á·Æ¸ÇÁÈÀµ¸ÅÆ´Ãø´ÅÂÅPTT To base & handset: X
(X represents the handset numbers of one or more destination handsets; a
maximum of four handset numbers appear).
f Your voice is broadcast to all destination devices.
ì¸ÅÆÃ¸´¾¼ÁºÅ¸¿¸´Æ¸PTT on your handset or PTT/
FLASH on your telephone
base²ÂÈÅ·¸É¼¶¸Ê¼¿¿µ¸¸Ãì¸ÅÇ»¸µ¸¸Ã¼¹ÌÂÈÅÆÃ¸´¾¸ÅûÂÁ¸¿¼º»Ç¼Æ
ÂæÌÂȶ´Ápress and hold PTT on your handset or PTT/
FLASH on your
telephone base to continue speaking, or the destination device can respond.