84
Answering system
Answering system settings
Voice guide to set Answering system
This feature is an alternative way for you to do the basic setup of the answering
system. You can follow the voice guide to record your own announcement, set
the number of rings, and set the message alert tone.
This feature is only available in the telephone base.
1. When the telephone base is in idle mode, press MENU/
SELECT.
2. Press T
CID or SDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press T
CID or SDIR to scroll to Voice guide, then press MENU/SELECT.
4. You hear the voice prompt Ö»¼Æɼ¶¸ºÈ¼·¸Ê¼¿¿´ÆƼÆÇÌÂÈʼǻǻ¸µ´Æ¼¶
ƸÇÈùÌÂÈÅ´ÁÆʸżÁºÆÌÆǸÀ×
5. Set up your answering system by inputting the designated numbers as
instructed in the voice guide.
Notes:
f You can press CANCEL to quit the voice guide at any time.
f After a power outage, the system prompts you to set the date and time, and Smart call blocker. After these settings
are done or skipped, the system will prompt if you want to set up the answering system via voice guide. Press
MENU/SELECT to start the setup.
To Next Page
Loading...
Need help?
General
