AT&T CL83519 - Telephone Operation; Making a call; Answering a call

21
Telephone settings
Telephone base settings
Use the menu to change the telephone settings.
1. Press MENU/
SELECT on the telephone base when it is not
in use to enter the main menu.
2. Press
TCID or SDIR to scroll to the feature to be
changed. When scrolling through the menu, the > symbol
indicates the selected menu item.
3. Press
MENU/SELECT to select the highlighted item.
Note: Press CANCEL to cancel an operation, back up to the previous menu or exit the menu display. Press and
hold CANCEL to return to idle mode.
Ringer volume
²ÂÈ¶´ÁƸÇÇ»¸żÁº¸ÅÉ¿ÈÀ¸¿¸É¸¿ÇÂÂÁ¸¹Ç»¸ƼË¿¸É¸¿ÆÂÅÇÈÅÁÇ»¸żÁº¸ÅÂæ
°»¸ÁÇ»¸żÁº¸Å¼ÆÂæ
appears on the screen.
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Press
TCID or SDIR to scroll to Ringers, then press MENU/SELECT.
3. Press MENU/SELECT again to select Ringer volume.
4. Press
TCID or SDIR to sample each volume level.
5. Press
MENU/SELECT to save your preference.
Note: The telephone base ringer volume also determines the ringer volume for intercom calls.
Ringer tone
You can choose one of the ten ringer tones.
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Press
TCID or SDIR to scroll to Ringers, then press MENU/SELECT.
3. Press TCID or SDIR to scroll to Ringer tone, then press MENU/SELECT.
4. Press TCID or SDIR to sample each ringer tone.
5. Press
MENU/SELECT to save your preference.
Note: If you turn off the ringer volume, you will not hear ringer tone samples.

>Play messages
Answering sys
S

T