31
Telephone operation
Options while on calls
Blind transfer
°»¼¿¸ÂÁ´ÁÂÈÇƼ·¸¶´¿¿ÌÂȶ´ÁÇÅ´Áƹ¸ÅÇ»¸¶´¿¿Ç´Æø¶¼è¶·¸É¼¶¸ÂÅ´ÁÌ
device without notifying them.
To transfer an outside call from a cordless handset:
1. During the call, press MENU/
SELECT.
2. Press T
CID or SDIR to scroll Transfer, then press MENU/SELECT.
f If you have one handset and no other registered devices, the outside call
is put on hold and your handset shows Transferring call.... The telephone
base rings and shows Transfer from HANDSET X.
f If you have other registered device(s) or more than one handset, your
screen shows TRANSFER TO:. Use the dialing keys to enter a specific device
number (0 for the telephone base, 1-9 for handsets 1-9, TONE
followed
by 0-2 for handsets 10-12, or TONE
followed by # for all devices), or press
T
CID or SDIR to scroll to the desired device and press MENU/SELECT. The
outside call is put on hold and your handset screen shows Transferring
call... or Transferring call to all.... The other device rings and shows
Transfer from HANDSET X (HANDSET represents the handset name,
X represents the handset number).
3. To answer the call on the destination handset, press
PHONE/FLASH or
/SPEAKER. To answer the call on the telephone base, press /SPEAKER.
The initiating handset shows Call transferred and goes to idle mode.
To transfer an outside call from the telephone base:
1. During the call, press MENU/
SELECT.
2. Press T
CID or SDIR to scroll Transfer, then press MENU/SELECT.
f If your have one handset and no other registered devices, the outside
call is put on hold and the telephone base shows Transferring call.... The
handset rings and shows Transfer from BASE 0 (BASE represents the
base name).
To Next Page
Loading...
Need help?
General
