AT&T CL83519 - Control Uncategorized Calls (Customized Settings)

51
Smart call blockerSmart call blocker
Call block settings
5. Press TCID or SDIR to choose one of the following options, then press
MENU/SELECT.
f Screening - ask the caller to press the pound key (#) or to say his/her
name before the call rings on your telephone.
f Allow - allow the calls to get through and ring.
f Answering sys - forward the calls to the answering system without
ringing.
f Block - reject the calls with block announcement.
6. If you select Screening, press T
CID or SDIR to choose one of the following
options, then press
MENU/SELECT.
f w/ Caller name - ask the caller to say his/her name before the call rings
on your telephone. You can then answer the call, and hear the caller’s
name announced. You can decide whether to answer or reject the call, or
to forward the call to the answering system.
f w/o Caller name - ask the caller to press the pound key (#) before the
call rings on your telephone. You can then answer the call.
Control uncategorized calls (Customized settings)
Use this setting to control calls with numbers that are not in your directory,
allow list or block list, or have no caller ID number display. You can choose to
allow or reject these calls directly. You can also choose to screen them with
or without learning the callers’ names before you decide whether to answer
or reject these calls. Moreover, you can forward these calls to the answering
system.
To change the setting:
Using a cordless handset or the telephone base:
1. Press CALL BLOCK when it is not in use.
-OR-
Press MENU/
SELECT to enter the main menu when it is not in use. Press
T
CID or SDIR to scroll to Smart call blk, then press MENU/SELECT.
2. Press T
CID or SDIR to scroll to Set profile, then press MENU/SELECT.
3. Press TCID or SDIR to scroll to Customise, then press MENU/SELECT.
4. Press T
CID or SDIR to scroll to Uncategorized, then press MENU/SELECT.