22
Telephone settings
Telephone base settings
Set date/time
The answering system announces the day and time of each message prior
to playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day of
the week can be calculated from the caller ID information.
1. When the telephone base is in idle mode, press MENU/
SELECT to enter the
main menu.
2. Press
TCID or SDIR to scroll to Set date/time, then press MENU/SELECT.
3. Press
TCID or SDIR to select the month, then press MENU/SELECT, or enter
the number using the dialing keys.
4. Press
TCID or SDIR to select the day, then press MENU/SELECT, or enter the
number using the dialing keys.
5. Press
TCID or SDIR to select the year, or enter the number using the dialing
keys, then press
MENU/SELECT to move on to set the time.
6. Press
TCID or SDIR to select the hour, then press MENU/SELECT, or enter the
number using the dialing keys.
7. Press
TCID or SDIR to select the minute, then press MENU/SELECT, or enter
the number using the dialing keys.
8. Press
TCID or SDIR to select AM or PM, or press 2 for AM or 7 for PM. Press
MENU/SELECTǶÂÁèÅÀ
Note: If the clock is not set when a message is recorded, the system announces, “Time and day not set,” before it
plays the message.
To Next Page
Loading...
Need help?
General
