AT&T CL83519 - Home Area Code; Dial Mode

19
Telephone settings
Handset settings
Home area code
If you dial seven digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a call
from within your home area code, the caller ID log only displays the seven digits
of the telephone number.
This feature makes it easy for you to place a call from the caller ID log. If you dial
ten digits to make a local phone call, do not use this home area code feature. If
you do, you cannot place local calls from your caller ID log, as they will have only
seven digits.
To set the home area code:
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Press
TCID or DIR to scroll to Settings, then press MENU/SELECT.
3. Press
TCID or SDIR to scroll to Home area code, then press MENU/SELECT.
»¸ƶŸ¸ÁµÅ¼¸ëÌÆ»ÂÊÆOnly for 7 digit dial from CID.
4. Use the dialing keys to enter a three-digit home area code.
f Press MUTE/DELETE to delete a digit.
f Press and hold MUTE/DELETE to delete all digits.
5. Press
MENU/SELECT to save.
Note: If in the future, your telephone service provider requires you to dial ten digits to make a local call (area code
plus telephone number), you need to delete your home area code and dial out locally from the call ID log. With the
home area code displayed, press and hold
MUTE/DELETE until the digits are deleted, and then press
MENU/SELECT. The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
SELECT in idle mode to enter the main menu.
2. Press
TCID or SDIR to scroll to Settings, then press MENU/SELECT.
3. Press
TCID or SDIR to scroll to Dial mode, then press MENU/SELECT.
4. Press
TCID or SDIR to scroll to Touch-tone or Pulse, then press
MENU/SELECT.