Directory
Speed dial
The telephone system has nine speed dial locations (2-9, 0) and a voicemail
access location
1 where you can store the telephone numbers you wish to
dial more quickly. You can store up to 30 digits in each location. Speed dial
assignments can only be selected from the existing directory entries. The
voicemail access number must be manually entered. In the directory, speed dial
locations are indicated by their number on the bottom right hand corner of the
entry.
Assign a speed dial number
1. When the telephone is in idle mode, press MENU
/SELECT.
2. Press T
CID or SDIR to scroll to Directory. Press MENU/SELECT.
3. Press T
CID or SDIR to scroll to Speed dial. Press MENU/SELECT.
4. Press TCID or SDIR to choose your desired speed dial location (0 or 2-9), then
press
MENU/SELECT. The screen briefly shows Copy from Directory..., then
displays the directory list.
5. Press T
CID or SDIR to scroll to the phone number you wish to assign to the
selected speed dial location.
6. Press
MENU/SELECT to save the setting and return to the previous menu.
There is a confirmation tone and the screen returns to the speed dial list.
Assign your voicemail speed dial number
To assign your voicemail speed dial number to location
1, see page 17 or
page 24.
Make a call using speed dial
When in idle mode, press and hold the dialing key (0 or 2-9) corresponding to
the assigned location you wish to call.
Check your voicemail using speed dial
When in idle mode, press and hold
1 to dial the voicemail number you have
set. See page 17 or page 24 to set your voicemail speed dial number.
42
To Next Page
Loading...
