AT&T CL83519 - Page 88

82
Answering system
Answering system settings
To delete or reset your outgoing announcement:
Using a cordless handset:
1. When the handset is in idle mode, press MENU/
SELECT.
2. Press T
CID or SDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press
MENU/SELECT again to select Announcement.
4. Press T
CID or SDIR to scroll to Play annc, then press MENU/SELECT.
5. While the announcement is playing, press
MUTE/DELETE to delete the
announcement. The system announces ÖÁÁÂÈÁ¶¸À¸ÁÇ·¸¿¸Ç¸·×and the
screen shows Annc. Deleted.
-OR-
1. When the handset is in idle mode, press MENU/
SELECT.
2. Press T
CID or SDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press
MENU/SELECT again to select Announcement.
4. Press T
CID or SDIR to scroll to Reset annc, then press MENU/SELECT. The
screen shows Reset to default annc?.
5. Press
MENU/SELECT again. The screen shows Annc. reset to default.
Using the telephone base:
1. When the telephone base is in idle mode, press MENU/
SELECT.
2. Press T
CID or SDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press
MENU/SELECT again to select Announcement.
4. Press T
CID or SDIR to scroll to Play annc, then press MENU/SELECT
5. While the announcement is playing, press
MUTE/DELETE to delete the
announcement. The system announces ÖÁÁÂÈÁ¶¸À¸ÁÇ·¸¿¸Ç¸·×and the
screen shows Annc. Deleted.
When your announcement is deleted, the system answers calls with the
default announcement described on page 80. You cannot delete the default
announcement.
-OR-
1. When the telephone base is in idle mode, press MENU/
SELECT.
2. Press T
CID or SDIR to scroll to Answering sys, then press MENU/SELECT.
3. Press
MENU/SELECT again to select Announcement.
4. Press T
CID or SDIR to scroll to Reset annc, then press MENU/SELECT. The
screen shows Reset to default annc?.
5. Press
MENU/SELECT again. The screen shows Annc. reset to default.