AT&T Link User Manual

02
03
04
05
06
07
08
01
14
15
SIM card and battery
About your SIM card
When you subscribe to your network operator, you receive a SIM
(SubscriberIdentityModule)cardcontainingyourregistration
information, PIN code, etc.
Like a credit card, it should be kept secure and handled carefully.
Donotbend,scratchorexposeittomoisture.Avoidstatic
electricity.
To avoid corrupting your SIM card’s memory, always switch o
your phone before removing or inserting your SIM card.
About your battery
YourphoneusesaLi-Ionbattery.Makesuretouseanauthorized
battery and charger only. For more details, please inquire at your
nearest dealer.
note:YourphoneispoweredbyaLithiumIon(Li-Ion)battery.Unlike
other forms of battery technology, you can recharge your battery while
some charge remains without reducing your phone’s autonomy due to the
“batterymemoryeect”inherentinthosetechnologies.
Installing/removing SIM card and battery
1.Removethebatterycoverfromtheunit.
2.Totthebatterycover,putitonthe
guide rail and push up.
3. Insert the SIM card into the slot. The
gold contacts of the SIM card should go
against the metal contacts of the phone.
Put the contacts of the battery into the
hole located at the bottom of the unit
insert and press the upper side of the
batteryuntilyouhearthe“click”.Make
sure you align the gold contacts at the
battery end with contacts on the phone.
If the contacts at the battery are not
properly aligned, damage could occur to
the phone and the battery.
4.Toremovethebatterypushthebottom
ofthebatterytoupwards(1)and
remove(2)thebattery.PushtheSIM
card in the direction of the arrow as
shown.
Charging your battery
1.Tocharge,opentheprotectivecover
on the top right side and connect the
charger adapter.
Make sure you align the connector
as shown in the image. If not, it will
damage the charging connector on
the phone and will not charge.
2.Toremovetheadapterconnection
presstheadapter’ssidebuttons(1)
andpulltheadapteraway(2).
Incorrect
Correct
Incorrect
Correct
Turning the phone on/off
To turn on
1.Pressandhold E .
To turn o
1.Pressandhold E .

AT&T Link Specifications

General

2G bands	GSM 850 / 900 / 1800 / 1900
GPRS	Yes
EDGE	Yes
Alert types	Vibration; MP3, WAV ringtones
Loudspeaker	Yes
3.5mm jack	Yes
GPS	Yes, with A-GPS
USB	microUSB 2.0
Games	Yes
Colors	Black
Network Technology	GSM / HSPA
3G bands	HSDPA 850 / 1900 / 2100
Speed	HSPA
WLAN	Wi-Fi 802.11 b/g/n
Bluetooth	A2DP
Radio	FM radio
Messaging	SMS(threaded view), MMS, Email, IM
Browser	HTML
Stand-by	Up to 432 h (3G)
Talk time	Up to 6 h (3G)
Operating System	Android