Operation
13
Conference speakerphone operation
Paging
This feature helps you find any misplaced wireless mics within the range of
the base unit.
To start the paging tone:
1. Press on the base unit.
2. Press or to scroll to Find microphone, and then
press . The base unit displays ** Paging **. All
wireless mics that are not on the charging cradles play
the paging tone for 60 seconds.
To mute the paging tone:
Press on a wireless mic, or put it back on the charging cradle.
To stop paging:
Press or
on the base unit.
NOTE: An incoming call stops the paging process.
Join a call in progress
When the base unit is already on a call and you would like to join the call
using a wireless mic, push the wireless mic and then lift it from the cradle.
Place the wireless mic on the cradle to end the call. The call does not end
until the base unit hangs up.
Settings
>Find microphone
** Paging **
To Next Page
Loading...
