Call log
35
Call log operation
Save a call log entry to the phonebook
1. When in the call log, press or to browse.
2. When the desired entry displays, press twice.
3. Press to select Store to PB. The screen displays
EDIT NUMBER.
4. Use the dialing keys to edit the number.
Press or to move the cursor to the left or right.
Press to erase a digit.
Press and hold to erase all digits.
Press and hold to enter a three-second dialing pause (a p appears).
5. Press to move to the name. The screen displays EDIT NAME. Use the
dialing keys (page 24) to edit the name.
Press or to move the cursor to the left or right.
Press to add a space.
Press to erase a character.
Press and hold to erase all characters.
Press to change the next letter to upper or lower case.
Press (pound key) to move the last word to the front. For example,
Johnson Charlie becomes Charlie Johnson when you press .
6. Press when done. The base unit displays Saved and returns to the
call log.
NOTES:
You might need to change how a caller ID number is dialed if the entry does not appear in
the correct format. Caller ID numbers might appear with an area code that is not
necessary for local calls, or without a 1 that is necessary for long distance calls (see View
dialing options on page 34).
If the name you received from the telephone service provider is all in capital letters, the first
letter of every word remains a capital letter, while other letters become lower case. However,
the next letter after the prefix “Mac”, “Mc”, or “O’”, is kept as a capital letter. For example, the
“D” in “MacDonald” is kept as a capital letter.
If the telephone number from the caller ID information has already been saved in the
phonebook under a different name, the new name will overwrite the old one.
•
•
•
•
•
•
•
•
•
•
•
•
•
>Store to PB
Delete
To Next Page
Loading...
Need help?
General