19
Settings
Conference speakerphone settings
Key tone
The base unit is set to beep with each key press. You can adjust the key tone
volume or turn it off. If the key tone is off, there are no beeps when you
press the keys.
1. Press in idle mode to enter the main menu.
2. Press or to scroll to Settings, then press .
3. Press or to scroll to Key tone, then press .
4. Press or to sample each key tone (Off, or 1 to 3).
5. Press to save your preference. There is a confirmation tone and the
screen returns to the previous menu.
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the base unit to
make a call.
1. Press in idle mode to enter the main menu.
2. Press or to scroll to Settings, then press .
3. Press or to scroll to Dial mode, then press .
4. Press or to choose Touch-tone or Pulse, then press
. The screen showsThe screen shows DIAL MODE is touch-tone or
DIAL MODE is pulse. There is a confirmation tone and the screen returnsThere is a confirmation tone and the screen returnsand the screen returns
to the previous menu.
NOTE: You can press to switch to tone dialing temporarily when using pulse service
while on a call.
Rename base
>Key tone
KEY TONE
Key tone
>Dial mode
DIAL MODE
>Touch-tone
To Next Page
Loading...
Need help?
General