Settings
20
Conference speakerphone settings
Area code
If you dial seven digits to make a local call (no area code required), program
your area code so that when you receive a call from within your local area,
the call log only displays the seven digits of the telephone number.
This feature makes it easy for you to place a call from the call log. If you dial
10 digits to make a local phone call, do not use this area code feature. If
you do, you cannot place local calls from your call log, as they will have only
seven digits.
To set the home area code:
1. Press in idle mode to enter the main menu.
2. Press or to scroll to Settings, then press .
3. Press or to scroll to Area code, then press .
The screen briefly shows Only for 7digit dial from CID.
4. Use the dialing keys to enter a three-digit area code.
Press or to move the cursor to the left or right.
Press to delete a digit.
Press and hold to delete all digits.
5. Press to save. There is a confirmation tone and the screen shows
Area code will not show in CID briefly before returning to the previous
menu.
•
•
•
Dial mode
>Area code
AREA CODE:
___
To Next Page
Loading...
Need help?
General