16
Conference speakerphone settings
You can use the menu to set the date and time and change other settings.
In the Ringers menu, you can adjust the ringer volume and select the ringer
tones for incoming calls.
In the Settings menu, you can change the settings for LCD language, base
unit name, key tone, dial mode, area code, and loop gain. You can also reset
the base unit to default settings.
To enter the menu:
1. Press when in idle mode (when the base unit is not in use) to enter
the main menu.
2. Press or to scroll to the feature to be changed.
When scrolling through the menu, the > symbol
indicates the selected menu item.
3. Press to select the item.
NOTE: Press to cancel an operation, back up to the previous menu or exit the
menu display.
Ringer volume
You can set the ringer volume level (1-6) to one of six levels or turn the
ringer off. When the ringer is off, Ringer off appears on the screen.
1. Press or in idle mode to sample each ringer volume level
(Ringer off, or 1 to 6).
2. Press to save your preference. There is a confirmation tone and the
screen returns to idle mode.
-OR-
1. Press in idle mode to enter the main menu.
2. Press or to scroll to Ringers, then press .
3. Press again to select Ringer volume.
4. Press or to sample each ringer volume level
(Ringer off, or 1 to 6).
5. Press to save your preference. There is a
confirmation tone and the screen returns to the previous menu.
NOTE: If the ringer volume is set to off, that base unit is silenced for all incoming calls.
However, the wireless mics still play the paging tone when responding to paging feature
(page 13).
Settings
>Phonebook
Call log
Clear Redial
>Ringers
>Ringer volume
Ringer tone
RINGER VOLUME
To Next Page
Loading...
Need help?
General