AT&T SB3014 User Manual

18
Conference speakerphone settings
LCD language
You can select the language used for all screen displays.
1. Press in idle mode to enter the main menu.
2. Press or to scroll to Settings, then press .
3. Press to select LCD language.
4. Press or to choose English, Français or Español,
then press . The screen prompts Set English/
Français/Español as LCD language?
5. Press to confirm. There is a confirmation tone and the screen returns
to the previous menu.
NOTE: If you accidentally change the LCD language to French or Spanish, you can reset it
back to English without going through the French or Spanish menus. Press
in idle mode, then enter
364
. There is a confirmation tone.
Rename base unit
You can create a new name for the base unit. The default name is
Conference Phone.
1. Press in idle mode to enter the main menu.
2. Press or to scroll to Settings, then press .
3. Press or to scroll to Rename base, then press .
4. Change the base unit name when prompted.
Press or to move the cursor to the left or right.
Use the dialing keys to enter a name (up to 16
characters). Each time you press a key, a character
on that key appears. Additional key presses produce
other characters on that key. See the chart on page 24.
Press to backspace and delete characters.
Press and hold to delete all characters.
Press to change the next letter to upper or lower case.
5. Press to save the setting and return to the previous menu. There is a
confirmation tone.
•
•
•
•
•
Settings
Set date/time
>Settings
>LCD language
Rename base
LCD LANGUAGE
>English 
LCD language
>Rename base
RENAME BASE
Conference Phone

AT&T SB3014 Specifications

General

Brand	AT&T
Model	SB3014
Category	Telephone
Language	English