Syn248 Installation and Configuration Guide Back to Contents
Installation 25
To connect power:
If you are using PoE, connecting the Deskset to the network also connects the power.
If you are using the supplied power adapter:
1. Plug the power adapter (blue tag) into the DC Power jack on the back of the Deskset.
2. Plug the power adapter into an outlet not controlled by a wall switch. The display
screen illuminates within a minute.
If the user's computer is plugged into an uninterruptible power supply (UPS), consider
plugging the Deskset into it, too. This will help prevent a computer connected to the
Deskset PC port from losing its network connection during a power outage (providing
that other network resources have backup power as well).
To Next Page
Loading...
