AT&T Syn248 SB35025 - Deregistering a Cordless Headset

Syn248 Installation and Configuration Guide Back to Contents
Installation 32
Deregistering a Cordless Headset
You must deregister cordless accessories before you can register them to different
Desksets. If you remove a Deskset from the system, first deregister any cordless
accessories.
SB35025 To deregister a cordless headset:
1. Press (MENU), then 2, and then 6.
The Cordless Headset menu appears.
2. Press . The confirmation message appears.
3. Press to confirm deregistration.
The Deskset screen displays Headset is not registered.
4. Press (CANCEL). The User Settings menu appears.
SB35031 To deregister a cordless headset:
1. Press (MENU), then 2, and then 5.
The Cordless Headset Registration menu appears.
2. Press . The confirmation message appears.
3. Press to confirm deregistration.
The Deskset screen then displays Cordless Headset is currently Not Registered.
DeReg
Yes
Cordless Headset Registration
Cordless Headset is currently
Registered
Exit
Press DeReg to deregister the Cordless
Headset.
Quick
Dial
DeReg
DeReg
Yes