AT&T Syn248 SB35025 - Device Management; Deleting Devices

Syn248 Installation and Configuration Guide Back to Contents
System Configuration 68
Device Management
Use the Device Management page to delete devices from the system and to change
Deskset extension numbers. If you unplug a Deskset from the system, the extension
remains in the system database until you use the Device Management page to delete
the device. All local settings and personal information (Call Logs and voice messages, for
example) remain stored in the Deskset.
Device Management consist of:
 “Deleting Devices” on page 68
 “Change an Extension Number” on page 69
 “Back Up and Restore Settings” on page 70
 “Updating Devices” on page 74
 “Device Log” on page 78
 “Advanced PSTN Settings” on page 80.
Deleting Devices
You can delete any device in the system from the Device Management page.
Disconnect the device before deleting it from the system. If the device is not
disconnected, an error message appears, asking you to disconnect the device.