AT&T Syn248 SB35025 - SB35010 Gateway Features

Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 83
SB35010 Gateway Features
Figure 20 illustrates the Gateway features and connections.
Figure 20. Gateway Features and Connections
DC 5.1V
LINE 1
LINE 2 LINE 3 LINE 4 BYPASS
LAN
RESET
LINE 1
LINE 2
LINE 3
LINE 4
POWER
SELECT CANCEL
DOWN
UP
+-
1
2
3
4 5 6
1. Display Provides system and network status, device information, and
configuration data. See “Gateway Front Panel Interface” on
page 85.
2. RESET Restarts the Gateway when pressed momentarily.
Restores the Gateway to factory default settings when pressed and
held for more than five seconds with the LAN cable disconnected.
3. PSTN Line Ports 1–4 Traditional 2-conductor wiring (FXO — Foreign Exchange Office
Ports).
4. Bypass Port Traditional analog POTS (Plain Old Telephone Service) that is
available during an AC power outage. If the Gateway power fails,
calls on Line 4 are routed to the bypass line.
5. RJ-45 Ethernet Network Port 10Base-T/100Base-Tx with Auto MDI/MDI-X switching.
6. DC 5.1V Power-Supply Jack