Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 94
Reset User Password
Having a user password is not required, but users may want to set one in order to prevent
others from accessing their messages or User Settings. If users forget their passwords,
or you want to eliminate the need for a password, or to enter a new user password, you
need to reset the user password.
To reset the user password:
1. On the Admin Settings menu, press 4 to begin the password reset process. The
confirmation screen appears.
2. Press to confirm password reset.
A screen appears, informing you that the password has been reset. The Deskset user
can now access settings menus and messages without entering a password.
Upgrade Deskset Software
You can upgrade Deskset software from the Deskset or using the WebUI. To update the
Deskset software from the WebUI, see “Updating Devices” on page 74.
To access the Deskset Software Upgrade feature:
1. On the Admin Settings menu, press 5 to display the Software Upgrade screen. The
system scans for an upgrade.
Admin Settings
Are you sure you want to
reset the User password ?
Press Yes to reset password or No to
cancel.
No
Yes
SB35031 Deskset SB35025/SB35020 Deskset
Software Upgrade
Scanning for upgrades...
Current Image Version
Quick
Dial
syn248-ds-petra-v1.3.0.img
Exit
SB35031 Deskset SB35025/SB35020 Deskset
To Next Page
Loading...
