Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 92
IP Settings
On the IP Settings menu, you can manually configure the Deskset IP address. See
“Appendix B: IP Addresses and Connectivity” on page 119 for a discussion of the Syn248
network configuration and IP settings.
To display the IP Settings menu:
1. On the Admin Settings menu, press 3 to display the IP Settings menu.
2. Perform one of the following:
a. Press 1 to select IP Configuration. See “To set the IP Configuration:” on
page 92.
b. Press 2 to select Set/Edit Static IP. See “To set and edit static IP Address:” on
page 93.
c. Press 3 to select IP Status. See “To view the IP status:” on page 93.
To set the IP Configuration:
1. On the IP Settings menu, press 1 to select IP Configuration.
2. Press
or to select Auto or Static.
3. Press to accept the changes and return to the Admin Settings menu.
Press or to move highlight.
Use or to cycle through options.
IP Settings
1. IP Configuration Auto
2. Set/Edit Static IP
Save
3.
Quick
Dial
SB35031 Deskset SB35025/SB35020 Deskset
To Next Page
Loading...
