Syn248 Installation and Configuration Guide Back to Contents
System Configuration 38
Error Handling
If you type an invalid value into one of the WebUI fields and click , the page is not
saved. The WebUI displays an error message at the top of the page. The field with the
incorrect value is highlighted in yellow, as shown in Figure 16. You can view a more
detailed error description by resting your mouse pointer on the highlighted field.
.
Figure 16. WebUI Error Indication
To view Detailed System Information:
1. On the System Information page, click .
Information specific to each installed device appears. There may be a delay as the
system gathers this information.
Error Message
Invalid Entry
The Connected column indicates whether or not the listed device is
synchronized with the system, so that communication can occur. No means the
device is registered with the system, but not currently powered on or detected.
To Next Page
Loading...
