AT&T Syn248 SB35025 - Fwd;Trans to Outside Line

Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 91
Fwd/Trans to Outside Line
You can enable or disable the ability of each Deskset to forward or transfer a call to an
outside line. These features use two of your telephone lines. This function is enabled by
default. Disabling this function prohibits the user from sending a call to an outside line
via the Gateway.
To enable or disable Forward/Transfer to an outside line:
1. On the Admin Settings menu, press 2 to display the Forward/Transfer to line
screen.
2. Press
 or  to select Enabled or Disabled.
3. Press to accept the changes and return to the Admin Settings menu.
Press or to cycle through
options.
Fwd/Trans to line
Fwd/Trans to line Enabled
Save
Disabling this option will prohibit Call
Forwarding or Call Transfers to an
outside line.
Quick
Dial
SB35031 Deskset SB35025/SB35020 Deskset
Save
If the Intercom Call Forward–No Answer target is set to Phone #, a
warning message will appear if you set Fwd/Trans to Outside Line to
Disabled. The message warns you that Call Forward–No Answer is now
set to OFF. You may want to select a new target for the Intercom Call
Forward–No Answer setting.