AT&T Syn248 SB35025 - Page 94

Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 93
Set/Edit Static IP
If your business requires a static IP address, you can enter static IP info at each Deskset.
To set and edit static IP Address:
1. On the IP Settings menu, press 2 to display the Set/Edit Static IP screen.
2. Enter digits:
 The number field is limited to 12 digits (not including dots).
 Pressing inserts a dot.
 Pressing when the cursor is positioned next to a dot deletes the dot
and the digit to the left of the dot.
3. Press
 or  to move to another field.
4. Press to accept the changes and return to the Admin Settings menu.
IP Status
The IP Status screen is for informational purposes only.
To view the IP status:
1. On the IP Settings menu, press 3 to display the IP Status screen.
2. Press
 or  to view status entries that are not shown on screen.
3. Press to return to the Admin Settings menu.
Use dial pad to enter digits and press #
to enter a dot.
IP Settings
IP Address:
Subnet Mask:
Quick
Dial
Save
Gateway:
DNS Server:
Backspc
SB35031 Deskset SB35025/SB35020 Deskset
"."
" ”" ”
Backspc
Save
IP Status
IP Type Auto
IP Address 192.168.0.123
Use or to scroll. Press Exit when
done.
Quick
Dial
Subnet Mask 255.255.255.0
Gateway 192.168.0.1
MAC Address 00:11:A0:00:12:8D
Network Port Connected
PC Port Connected
Exit
SB35031 Deskset SB35025/SB35020 Deskset
Exit