Syn248 Installation and Configuration Guide Back to Contents
Device Configuration 84
Figure 21 and Table 2 provide an illustration and description of the Gateway front panel.
Figure 21. Gateway Front Panel
Power LED
Status LEDs
Menu
Navigation
Keys
Table 2. Gateway Front Panel Keys and LEDs
Key Used To: LED Description
Navigate through the menus, and to
increase/decrease editable fields.
Highlight the previous or next item
in the list.
LINE 1
LINE 2
LINE 3
LINE 4
Line-status LEDs indicate the
status for each PSTN line.
Indications include:
Off — Connected.
Red (steady) — Disconnected.
Green (steady) — In use.
Green (flashing) — Ringing.
Line-status LEDs flash red after
lines are connected (during line
calibration).
Display the main menu when in idle
mode or while in network detection
mode; save current setting and
return to previous menu.
Terminate current operation without
saving new settings and to return to
the previous menu.
POWER Off — No power to the device.
Green — Power is present.
To Next Page
Loading...
