Syn248 Installation and Configuration Guide Back to Contents
System Configuration 73
To back up the System Settings:
1. In the navigation menu at left, click Device Management, then Back up/Restore,
then System Settings. The Back up/Restore System Settings page appears.
2. Click .
Your web browser opens a window asking you if you would like to save the
backup file. Click .
Save the file to a location on your computer so that you can restore your settings
later.
To restore the System Settings:
1. If practical, unplug the telephone lines from each Gateway while restoration is in
progress to ensure you do not receive any incoming calls.
If you have two Gateways, and you log on to one of the Gateways using the
Gateway’s IP address, you do not need to unplug all of the other outside lines from
the other Gateway; just the one that you have logged on to.
2. In the navigation menu at left, click Device Management, then Back up/Restore,
then System Settings. The Back up/Restore System Settings page appears.
3. Enter the name for the restore file or click and select a system file.
Make sure you select the correct file to restore. The restore file name includes
“system” and the date and time.
4. Click . The system settings are restored and the Gateway
restarts. You are then logged off from the WebUI.
To Next Page
Loading...
