9
Getting started
Add and register handsets
6. Place the unregistered handset into the charger.
The handset beeps once and begins registering
to the telephone base. It takes up toIt takes up to 60 seconds
to complete the registration. There is a beep
sound when the registration is successful. The
telephone base shows Handset registered and
then the handset shows X:Handset X (X represents the handset
number [1-0]; Handset X represents the handset name).
NOTES:
If the registration is not successful, the telephone base screen displays
Registration failed with an error tone. To reset the handset, remove the handset
from the cradle. Try the registration process again.
Please make sure to remove all unregistered system handsets or cordless
headsets from the chargers before registering a new handset.
•
•
2:Handset 2
Set date & time
Charging
To Next Page
Loading...
Need help?
General
