43
Directory
Create directory entries
Create and store a directory entry
Use the following steps to store a name and number in the directory.
When the handset is idle:
Press MENU/ENTER twice to select Directory.
-OR-
Press DIR to enter the directory.
2. Press the Add softkey to add an entry.
3. Enter or change the telephone number (up to 32 digits) using the
dial pad when prompted.
Press or to move the cursor to the left or right.
Press OFF/CLEAR on the handset to backspace
and delete characters.
Press and hold OFF/CLEAR on the handset to delete all characters.
Press REDIAL/PAUSE to enter a three-and-a-half second dialing
pause (see page 44).
Press the Flash softkey to enter a flash (see page 45).
Press the Back softkey to return to the previous screen.
NOTE: If the telephone number in the directory exceeds 16 digits, < appears in front
of the telephone number. Press < to move towards the beginning of the telephone
number or press > to move towards the end of the telephone number.
4. Press MENU/ENTER to save the number.
5. Enter the name when prompted.
Use the dial pad to enter a name (up to
16 characters). Each time a key is pressed, the
character on that key appears. Additional key
presses produce other characters on that key. See
the chart on the next page.
1.
•
•
•
•
•
•
•
•
•
Directory
2 entries
Add Del All
Enter phone #:
8888832445
Back Flash
Enter name:
Robert Brown
Back
To Next Page
Loading...
Need help?
General
