3
Getting started
Installation
If you subscribe to high-speed Internet service (DSL - digital subscriber- digital subscriber
line) through your telephone line, you must install a DSL filter between) through your telephone line, you must install a DSL filter between
the telephone line cord and the telephone wall jack. The filter
prevents noise and caller ID problems caused by DSL interference.
Please contact your DSL service provider for more information about
DSL filters.
Your product may be shipped with a protective sticker covering the
handset display - remove it before use.
For customer service or product information, visit our website at
www.telephones.att.com or call 1 (888) 915-2007.
In Canada, dial 1 (866) 288-4268.
Avoid placing the handset and charger too close to:
• Communication devices such as: television sets, VCRs, or other
cordless telephones.
• Excessive heat sources.
• Noise sources such as a window with traffic outside, motors,
microwave ovens, refrigerators, or fluorescent lighting.
• Excessive dust sources such as a workshop or garage.
• Excessive moisture.
• Extremely low temperature.
• Mechanical vibration or shock such as on top of a washing machine
or work bench.
To Next Page
Loading...
Need help?
General
