10
Getting started
Deregister handsets
You may need to deregister your handsets if you already have ten
registered devices and need to replace a handset, or if you wish to
change the assigned numbers of your registered handsets.
You must first deregister the desired device(s), and then register the
handset(s) that you wish to use, one at a time.
Please read carefully through all the instructions in this section
before beginning the deregistration process.
This process deregisters the selected extension registered to the
telephone base. Please make sure the telephone system is not in use
before deregistration.
On the telephone base, press MENU/ENTER.
Scroll down to Registration and press MENU/ENTER.
Scroll down to Deregistration and press
MENU/ENTER.
The telephone base screen shows Deregister:.
Scroll to choose the desired handset, then press
MENU/ENTER.
The screen shows Deregister Handset X? <=No
=>Yes (Handset X represents the handset name).
Press REP to exit or press SKIP to continue
the deregistration.
The telephone base screen shows Deregistering.
It takes up to 10 seconds to complete the
deregistration. The screen shows Handset X
deregistered and the telephone base beeps when
deregistration is successful.
NOTES:
If the deregistration process is not successful, you might need to reset the
system and try again. To reset: pick up the handset and press PHONE/FLASH,
then press OFF/CLEAR and place the handset back into the charger. You can
also reset the telephone base by unplugging the power from the telephone base
and plugging it back in.
To register a cordless handset again, see pages 8-9.
1.
2.
3.
4.
5.
6.
•
•
Deregister
Handset 1?
<=No =>Yes
Deregistering
Handset 1
deregistered
Register HS
Deregistration
>
Deregister:
>Handset 1
Deskset 2
All
To Next Page
Loading...
Need help?
General
