16
Getting started
Handset setup
Line selection
You can select the default telephone line to be used when you make
outgoing calls. This handset comes factory set for Auto selectable
line, which chooses the first available line for making a call. To select
a particular line, choose Line 1, Line 2, Line 3 or Line 4.
When the handset is idle, press MENU/ENTER.
Press DIR or CID to scroll to Handset setup.
Press MENU/ENTER.
Press DIR or CID to scroll to Line selection.
Press MENU/ENTER.
Press DIR or CID to select Auto, Line 1,
Line 2, Line 3 or Line 4.
Press MENU/ENTER to save the setting and return
to the previous menu. There is a confirmation tone. To exit without
making changes, press OFF/CLEAR.
Change handset name
You can create a handset name for each registered handset.
When the handset is idle, press MENU/ENTER.
Press DIR or CID to scroll to Handset setup. Press MENU/ENTER.
Press DIR or CID to scroll to Handset name. Press MENU/ENTER.
Change the handset name when prompted.
Press or to move the cursor to the left or right.
Use the dial pad to enter a name (up to 13
characters). Each time you press a key, a
character on that key appears. Additional key
presses produce other characters on that key.
See the chart on page 44.
Press OFF/CLEAR to backspace and
delete characters.
Press and hold OFF/CLEAR to delete
all characters.
5. Press MENU/ENTER to save the setting and return to the previous
menu. There is a confirmation tone. To exit without making changes,
press OFF/CLEAR.
1.
2.
3.
4.
5.
1.
2.
3.
4.
•
•
•
•
Line selection
:Auto
Back
Key tone
Auto key lock
Language
>Line selection
Back
Auto key lock
Language
Line selection
>Handset name
Back
Enter HS name:
Handset 1
Back
To Next Page
Loading...
Need help?
General
