36
Handset operation
Intercom
You can use the intercom feature for conversations between the
telephone base and an accessory device, or between two accessory
devices. When the system is on one or more external calls, accessory
devices can make intercom calls with each other. If you have a
cordless headset, it can only receive intercom calls.
Each device that is registered to the telephone base is assigned an
extension. Extension numbers are assigned in sequential order (0-9)
as they are added.
Use the handset number to initiate intercom and transfer calls
between handsets. Use (star key) to initiate intercom and transfer
calls between the handset and the telephone base.
When you make an intercom call or transfer a call to the 10
th
handset
or the cordless headset, you must press 0.
Make an intercom call
When the handset is idle, presspress INT.
Press DIR or CID to scroll to the desired
extension number. Press PressPress MENU/ENTER.
-OR-
Press the desired extension number, (star key) for
the base, or # (pound key) for all.
Your handset screen shows Calling X:Handset X,
Calling X:Deskset X, Calling
*
:Base, or Calling All.
3. Answer an intercom call just as you would answer
a normal call, or press INT. Both extensions now
show Intercom.
4. End an intercom call just as you would end a
normal call.
NOTES:
Before the intercom call is answered, you can cancel the intercom call by
pressing OFF/CLEAR on the calling handset.
The intercom call automatically cancels if the call is unanswered after one minute.
Pressing OFF/CLEAR or MUTE temporarily silences the intercom ringer.
When you choose All in the menu, all the devices ring. The intercom call is
established with the first one who answered the call.
If a line is in use, pressing INT places the line on hold and activates the intercom.
1.
2.
•
•
•
•
•
Intercom 00:01:15
*: Base
1: Handset 1
#: All
Back
*: Base
Calling
1:Handset 1
To Next Page
Loading...
Need help?
General
