AT&T TL76108 - Telephone Operation; Basic Operation

14
Telephone operation
Basic operation
Making a call
Using a cordless handset:
• Press LINE 1/FLASH, LINE 2/FLASH or
SPEAKER, then enter the telephone number.
To end a call:
• Press OFF/CLEAR or return the handset to the
charger.
Using the telephone base:
Lift the corded handset, or press SPEAKER
or HEADSET (if a headset is connected) on the
telephone base. To choose a line, press LINE 1
or LINE 2, then dial the telephone number. dial the telephone number.
To end a call:
• Return the corded handset to the telephone base,
or press SPEAKER or HEADSET (if a headset
is connected) to hang up.
On-hook dialing (predialing)
Using a cordless handset:
1. Enter the telephone number. Press
OFF/CLEAR to make corrections when entering
the phone number.
2. Press LINE 1/FLASH, LINE 2/FLASH, or
SPEAKER to dial.
Using the telephone base:
1. Enter the telephone number. Press CLEAR to
make corrections when entering the phone
number.
2. Press SPEAKER or HEADSET (if a headset is
connected) to dial.
-OR-
Lift the corded handset to dial.
•
HANDSET I
RDL
MENU CID
BASE
RDL
MENU CID
VOL HOLD MUTE
1
VOL
HOLD MUTE
1
NOTE: If the
speakerphone on the
telephone base is
active, placing the
corded handset in the
telephone base will not
end the call.