34
Telephone operation
Telephone base settings
Ringer volume
Using this menu, you can set the base ringer
volume level or turn the ringer off.
To adjust the RINGER VOLUME:
1. Press the MENU softkey when the phone is not
in use to enter the feature menu.
2. Press the or softkey to scroll to the SETUP
BASE menu, then press the OK softkey.
3. Press the SET softkey to select the RINGERS
menu.
4. To set the volume for line 1 or intercom, press
the or softkey to choose L1/INTERCOM
VOL.
-OR-
To set the volume for line 2, press the or
softkey to choose L2 VOLUME.
Press the SET softkey.
5. Press the + or - softkey to increase or decrease
the ringer volume.
-OR-
Press VOLUME to increase or decrease
the volume.
6. Press the OK softkey to save your preference.
NOTE: The ringer volume level also determines the
ringer level for intercom calls (page 24). If the
telephone base ringer volume level is set to off, the
telephone base ringer is silenced for all incoming and
intercom calls.
L1 VOLUME
-
OK +
BASE
RDL MENU CID
MENU softkey
OK
DIRECTORY
MAILBOXES
SETUP BASE
DISPLAY BASE-ID
SET
RINGERS
CALL SCREENING
SET PULSE/TONE
KEYPAD TONE
SET
L1/INTERCOM VOL
L2 VOLUME
L1 MELODY
L2 MELODY
To Next Page
Loading...
Need help?
General
