Answering system
Answering system mode
Set the answering mode
To set the answering mode:
1. Press the MENU softkey when the phone is not
in use to enter the feature menu.
2. Press the or softkey to scroll to the
MAILBOXES menu, then press the OK softkey.
3. To set for mailbox 1, press the or softkey
to scroll to the SETUP MAILBOX 1 menu.
-OR-
To set for mailbox 2, press the or softkey
to scroll to the SETUP MAILBOX 2 menu.
Press the OK softkey.
4. Press the SET softkey to select
ANSWER + RECORD.
5. To set the ANSWER + RECORD mode, press
the OK softkey to select ANSWER + RECORD.
-OR-
To set the ANSWER ONLY mode, press the
or softkey to choose ANSWER ONLY. Press
the OK softkey to save your preference.
Call screening at the telephone base
Call screening allows you to hear the
announcement and the incoming message when
a call comes in. You have to make sure the call
screening feature (page 60) and the answering
system are turned on.
Call intercept
While you are screening a call, you can stop
recording and speak to the caller by pressing
LINE 1/FLASH, LINE 2/FLASH, or
SPEAKER on the cordless handset, or by picking
up the corded handset or pressing
SPEAKER or HEADSET (if a headset is
connected) on the telephone base. You can also
press the corresponding line button (LINE 1 or
LINE 2) of the incoming call.
RDL MENU CID
MENU softkey
OK
DIRECTORY
MAILBOXES
SETUP HANDSET
REGISTER
OK
PLAY MAILBOX 1
PLAY MAILBOX 2
SET DAY/TIME
SETUP MAILBOX 1
SET
ANSWER + RECORD
REVIEW/CHNG OGA
SEC. CODE: 5000
# OF RINGS: 4
OK
L1 MAILBOX IS
CONFIGURED TO
ANSWER + RECORD
ANSWER ONLY
54
To Next Page
Loading...
Need help?
General
