Replacing a handset
You may need to de-register your handsets if:
You have eight registered handsets and need to replace a handset.
-OR-
You wish to change the designated handset numbers of your registered
handsets.
You must first de-register ALL the handsets, and then re-register each handset
you wish to use.
Please read carefully through all the instructions on this page before
beginning the de-registration process.
BASE
RDL
MENU CID
MENU softkey
OK
DIRECTORY
MAILBOXES
SETUP BASE
DISPLAY BASE-ID
SET
KEYPAD TONE
CONTRAST
RENAME
DEREGISTER ALL
YES
NO
DO YOU REALLY
WANT TO
DEREGISTER ALL
HANDSETS?
Appendix E
De-register all handsets
You can de-register all handsets on the
telephone base only.
1. Press the MENU softkey when the phone is
not in use to enter the feature menu.
2. Press the or softkey to scroll to the
SETUP BASE menu, then press the OK
softkey.
3. Press the or softkey to scroll to the
DEREGISTER ALL menu, then press the SET
softkey.
4. The screen will display DO YOU REALLY
WANT TO DEREGISTER ALL HANDSETS?.
Press the YES softkey to confirm or press
the NO softkey to return to the previous
screen.
5. All handsets will display NO BASE
SUBSCRIPTION and ENTER BASE ID on the
screen alternatively when de-registration is
successful.
6. To re-register the handset(s) to the
telephone base, follow the registration
instructions on page 72.
NOTE: If the de-registration process is not successful,
please try again.
73
To Next Page
Loading...
Need help?
General
