AT&T TL76108 User Manual

36
Telephone operation
Telephone base settings
Dial type
Both line 1 and line 2 are programmed for tone
dialing. If you do not have touch-tone dialing
service, you may want to change it to pulse
dialing.
To set the line(s) in pulse or tone mode:
1. Press the MENU softkey when the phone is not
in use to enter the feature menu.
2. Press the or softkey to scroll to the SETUP
BASE menu, then press the OK softkey.
3. Press the or softkey to scroll to the SET
PULSE/TONE menu, then press the SET
softkey.
4. To set for line 1, press the or softkey to
choose L1 MODE: TONE.
-OR-
To set for line 2, press the or softkey to
choose L2 MODE: TONE.
Press the SET softkey.
5. To change the mode to pulse, press the or
softkey to choose PULSE.
-OR-
To change the mode to tone, press the or
softkey to choose TONE.
6. Press the OK softkey to save your preference.
BASE
RDL MENU CID
MENU softkey
OK
DIRECTORY
MAILBOXES
SETUP BASE
DISPLAY BASE-ID
SET
RINGERS
CALL SCREENING
SET PULSE/TONE
KEYPAD TONE
SET
LI MODE: TONE
L2 MODE: TONE
OK
LINE I MODE IS
PULSE
TONE

AT&T TL76108 Specifications

General

Brand	AT&T
Model	TL76108
Category	Cordless Telephone
Language	English