How to fix DHW tank sensor error (T8) in Atlantic 024122 Heat Pump?
If there's an error with the DHW tank sensor (T8) in your Atlantic Heat Pump, it could be due to a short circuit, disconnected or cut off sensor, a defective sensor, or another error. Check the sensor connections or replace the defective sensor.
How to troubleshoot circuit 2 sensor error (T12) in Atlantic 024122?
If there's an error with the circuit 2 sensor (T12) in your Atlantic Heat Pump, it could be due to a short circuit, disconnected or cut off sensor, a defective sensor, or another error. Check the sensor connections or replace the defective sensor.
Why is room temperature missing in area 1 on my Atlantic Heat Pump?
If the room temperature in area 1 is missing when the "room T° influence" function (No. 33) is activated on your Atlantic Heat Pump, it's likely that parameter 33 is used without a room unit, or the room unit is disconnected or absent. Ensure that the room unit is connected and operational.
Why is room temperature missing in area 2 on my Atlantic 024122?
If the room temperature in area 2 is missing when the "room T° influence" function (No. 53) is activated on your Atlantic Heat Pump, it's likely that parameter 53 is used without a room unit, or the room unit is disconnected or absent. Ensure that the room unit is connected and operational.
What causes circuit temperature 2 to exceed 55°C in Atlantic 024122?
If circuit temperature 2 is greater than 55°C in your Atlantic Heat Pump, a defective mixing valve might be the cause. Check and replace the defective mixing valve.
What to do if the 2e zone sensor is not configured on my Atlantic 024122 Heat Pump (if 2nd circuits kit)?
If the 2e zone sensor is not configured, set the parameter 5700 to 2, 4 or 6.
To Next Page
General