Adjustment screw of the motor overload
Motor overload (FM1) setting
(A)
GA 5 GA 7 GA 11
208 V 33.0 43.0 61.0
230 V (standard factory setting) 30.0 39.0 55.0
460 V 15.0 19.0 27.5
To rewire the control transformer (T1), move the wire of the transformer to the terminal marked with the
desired voltage (208 V, 230 V or 460 V).
Replace the two fuses marked F1 by opening the fuse-holder. Use the 4 A fuses for 208 - 230 V and the 2 A
fuses for 460 V, supplied with the compressor.
Fuses Fuse rating V 208 V 230 V 460 V Class
F1 600 V AC 4 A 4 A 2 A UL class JDYX or JDYX2 10.3 x
38 mm
F2 250 V AC 3 A 3 A 3 A UL class JDYX or JDYX2 5 x 20
mm
Instruction book
2920 7090 51 129
To Next Page
Loading...
