References Description
A Intake air
B Air/oil mixture
C Compressed air
D Oil
Description
The air/oil mixture coming from the compressor element flows into the oil separator/tank, where most of the
oil is separated by centrifugal action. The oil collects in the lower part of air receiver/oil separator (OT) which
serves as oil tank. The remaining oil is removed by oil separator (OS). A small pipe returns the separated oil
towards the compressor element.
Air pressure forces the oil from oil separator/tank (OT) through oil cooler (Co) and filter (OF) towards
compressor element (E).
The system comprises a thermostatic bypass valve (BV). Only when the oil is warm, the valve allows the oil
to pass through the oil cooler.
2.4 Cooling system
Flow diagram
Cooling system
Instruction book
18 2920 7090 51
To Next Page
Loading...
