3.32 Web server
All Elektronikon controllers have a built-in web server that allows direct connection to a PC via a local area
network (LAN). This allows to consult certain data and settings via the PC instead of via the display of the
controller.
Getting started
Make sure you are logged in as administrator.
• Use the internal network card from your computer or an USB to LAN adapter (see picture below).
USB to LAN adapter
• Use an UTP cable (CAT 5e) to connect to the controller (see picture below).
Configuration of the network card
• Go to My Network places (1).
Instruction book
56 2920 7090 51
To Next Page
Loading...
