Reference Designation Function
9 LED, Service Is lit when service is needed.
10 Start button This button starts the compressor. Automatic operation
LED (3) lights up. The Elektronikon is operative.
11 Stop button This button is used to stop the compressor. Automatic
operation LED (3) goes out.
12 Scroll buttons Use these buttons to scroll trough the menu .
13 Enter button Use this button to confirm the last action
14 Escape button Use this button to go to previous screen or to end the
current action.
3.3 Icons used on the display
Function Icon Description
Compressor status When the compressor is stopped, the icon stands still.
When the compressor is running, the icon is rotating.
Motor stopped
Running unloaded
Running loaded
Machine control mode Remote start / stop
LAN control
Automatic restart after
voltage failure
Automatic restart after voltage failure is active
Timer
Active protection functions Emergency stop
Service Service required
Instruction book
28 2920 7090 51
To Next Page
Loading...
