Text on figure
(1) Menu
(2) Regulation
• Move the cursor to the Setpoint icon (see above, section menu icon) using the Scroll keys.
• Press the Enter key. Following screen appears:
Text on figure
(1) Regulation
(2) Unloading pressure 1
(3) Loading pressure 1
(4) Unloading pressure 2
(5) Loading pressure 2
(6) Modify
• The screen shows the actual unloading and loading pressure settings for both pressure bands.
To modify the settings, move the cursor to the action button Modify and press the Enter key. Following
screen appears:
• The first line of the screen is highlighted in red. Use the Scroll keys to highlight the setting to be modified
and press the Enter key. Following screen appears:
Instruction book
86 2920 7090 51
To Next Page
Loading...
