(1) Scroll keys
(2) Enter key
(3) Escape key
Menu icon, Week timer
Function
• To program time-based start/stop commands for the compressor
• To program time-based change-over commands for the net pressure band
• Four different week schemes can be programmed.
• A week cycle can be programmed, a week cycle is a sequence of 10 weeks. For each week in the cycle,
one of the four programmed week schemes can be chosen.
Procedure
Starting from the Main screen (see Main screen),
• Move the cursor to the action button Menu and press the Enter key. Use the Scroll buttons to select the
Timer icon.
Text on figure
(1) Menu
(2) Week Timer
• Press the Enter key on the controller. Following screen appears:
Instruction book
2920 7090 51 91
To Next Page
Loading...
